| click here to go back to the stock list menu | |||||||
| Blow Moulding Machines | |||||||
| REF | Type | PRODUCT AND DETAILS | YEAR | £unless stated | Picture Available | Full Spec | Stock Location |
| B286 | blow | Battenfeld Fischer BFB1-3D, Twin Parison, Twin station. | ~1993 | 18,500 | 272 | ||
| B285 | blow | Bekum BM303 (Year of manufacture = 1989): • 3.0 Litre Machine (1 x 2 Machine). • HDPE Twin Head at 125 mm centre distance. • 60 mm diameter, 24D Extruder. • 50 kN Clamp Force. • Moog Parison Programmer. • Bosch proportional hydraulice on the clamp and the carriage. |
1989 | tba | no | no | 319 |
| MA275 | blow / other | Sidel SBO 24/24, - Preforms hopper - Preforms elevator - Feeding rail - Heating wheel - Blowing wheel - Chiller - Electrical boards and Control panel mounted on the machine - Specialized Amcor preforms carton unloading/dispensing system - 2 Liter straight wall moulds for carbonated soft drinks with PCO 28 mm neck finish |
1994 / 1999 | € 250,000 | yes | yes | 257 |
| B284 | Blow | Stirling twin, approximately 200 litre machine, which was producing 2x 80 litre complete dust bins. | 95,000 | yes | 320 | ||
| B283 | Blow | Dassett rebuilt based on fischer BMO30, 30 litre machine, with 3kg parison size. Bottom and side blow, double bottom stretchers and double bottom blow pins with parison ceiling. 130mm screw. | 35,000 | yes | 320 | ||
| B282 | Blow | Krupp Kautex KEB5 10 Litre Machine, Single Head, Single Station, with de-flash, | 1994 | 22,000 | yes | 320 | |
| B281 | Blow | Bekum BM303 • 3.0 Litre Machine (1 x 2 Machine). • HDPE Twin Head at 125 mm centre distance. • 60 mm diameter, 24D Extruder. • 50 kN Clamp Force. • Moog Parison Programmer. • Bosch proportional hydraulice on the clamp and the carriage. |
1989 | tba | 319 | ||
| B280 | Blow | Automa 3 Speed, Twin Head, 125mm centres | 1985 | OFFERS | yes | yes | 0 |
| B279 | Blow | Kautex KEB5, Maximum dimensions of the mould: 435 x 470 mm. Thickness: 2 x 130 mm. Clamping force: 100 kN, Extruder: 60 mm. | 1986 | 24,000 | yes | yes | 301 |
| B275 | Blow | BEKUM HBD 111 Extruder 60 mm years twin station single head. | 1985 | 29,900 | no | no | 298 |
| B274 | Blow | BEKUM HBD 111 Extruder 60 mm years twin station single head. | 1986 | 31,000 | no | no | 298 |
| B273 | Blow | BEKUM BM 401 Extruder 60 mm Single Station twin head. | 1984 | 13,000 | yes | no | 298 |
| B272 | Blow | BEKUM BM 201 Extruder 60 mm Single station single head. | 1984 | 13,000 | yes | no | 298 |
| B271 | Injection Blow | Jomar 85S | ~1991 | 45,000 | no | no | 279 |
| B270 | Injection Blow | Bekum SBM 341 | 1991 | 77,000 | no | no | 294 |
| B269 | Blow | FKI CBL 30L | 2002 | 192,000 | yes | yes | 294 |
| B268 | Blow | FKI HBA 5Lx2x2 | 2000 | 210,000 | yes | yes | 294 |
| B267 | Blow | Uniloy M20S | 1993 | 135000 | no | no | 294 |
| B266 | Blow | Milacron : 2 x T 1600 two-bar hydraulic clamping system - 120 G - S35 | 2000 | POA | yes | yes | 29 |
| B264 | Blow | Kautex KEB-3, single head and will do a 3 litre container. | 1991 | 12,000 | no | no | 239 |
| B263 | Blow | Uniloy UMA30 6 Litre head blow moulding machine, top and bottom waste grippers and an article gripper. Will Blow container up to 30 litre. This machine comes complete with a 25 litre square round tool. | 1999 | 120,000 | yes | no | 239 |
| B262 | Blow | Techne 4000, single head, new oversized die and pin, new moog controls and various other work has been recently done. | 1986 | OFFERS | yes | no | 0 |
| B259 | Blow | Magic type MGL2ND, 70mm screw, twin head with twin auto trepanning, 1 25mm centres, Moog control, maximum bottle size 2 litre, 1 25mm deep, 300mm high. Max Mould dimensions = 270mm x 365mm, platens closed=160mm, platens open = 320mm | 1990 | 8,000 | yes | no | 0 |
| B258 | Blow | Magic type MGL2ND, 60mm screw, single head and twin head, 1 25mm centres, Moog control, maximum bottle size 2 litre, 1 25mm deep, 300mm high. Max Mould dimensions = 270mm x 365mm, platens closed=160mm, platens open = 320mm | 1989 | 10,000 | yes | no | 0 |
| B257 | Blow | Magic type MGL2ND, 50mm screw, single head and twin head, 1 25mm centres, Moog control, maximum bottle size 2 litre, 1 25mm deep, 300mm high. Max Mould dimensions = 270mm x 365mm, platens closed=160mm, platens open = 320mm | 1988 | 9,000 | yes | no | 0 |
| B255 | Blow | Krupp Kautex KEB-30, Complete with a 25 litre round square tool | 1985 | 75,000 | yes | no | 239 |
| B252 | Blow | ADS Stretch Blow moulder - refurbished 2005, manufactured 1999 - complete with 40 bar compressor and 6 moulds. Up to 2 litre. | 2005R | 150,000 | yes | yes | 254 |
| B247 | Blow | Battenfeld Fischer 120litre with 6.3 litre accumulator head, with 60 litre ring drum. | 1988 | £130,000 | yes | yes | 239 |
| B237 | Blow | Battenfeld Fischer VK1-3 | 1988 | 7,000 | yes | yes | 242 |
| B205 | Blow | Bekum BAE 6 Single station - 6 litre | 1981 | £21,000 | yes | yes | 207 |
| B204 | Blow | 2 off, BEKUM BM08 TWIN100M HEAD SINGLE STATION (2X 1 LITRE) Platens Size 180mm wide x 280mm long - Screw (diameter) 50 mm extruder S531. AUTOMA DIE HEAD | 1984 | 13500ea | yes | yes | 207 |
| UPDATED: | Photo/Spec Available on request via email | ||||||
| 18/08/2008 16:20 | (even if we dont currently have them) | ||||||
| All prices above are ex-works | ea = each | ||||||
| They are exclusive of VAT | |||||||
| Machinery International | |||||||
| Suppliers of used machinery and tools to the plastics and packaging industries | |||||||
| Valuations and Consultancy | |||||||
| VAT Registered - Number 462164263 | |||||||